SERVICE AGREEMENTS -- “THE SMART CHOICE”
AUGUSTA AIR CONDITIONING PREVENTIVE MAINTENANCE
Heating and cooling systems have a way of breaking down when the weather is at its worst; on the coldest day of a frigid winter, or during a sizzling summer heat wave; times when your comfort system must work the hardest, and when you need it most. 
Regular check-ups will help to maximize the life expectancy of your system; unfortunately, even the best maintenance won't prevent normal wear and tear.
YOUR INVESTMENT IN OUR SERVICE AGREEMENT INCLUDES:
TWO PERFORMANCE TUNE-UPS PER YEAR
Having your system checked regularly enables us to keep your unit running as efficiently as possible, which saves you money on your utility bill month after month. These regular check-ups also enables us to catch problems such as loose or burnt wires, and freon leaks, before they lead to a larger problem such as motor failure.
10% OFF REPLACEMENT PARTS
Example of savings: if the cost of a blower motor replacement was $400, you would save $40 on the repair.
LABOR WARRANTY
All of our labor services are warranted for 30 days. If you have a problem within 30 days of service, there will be no charge to come back out and diagnose the problem. We stand behind our work.
ENERGY SAVING COIL CLEANING
Dirty coils reduce efficiency and cause your unit to work harder, causing parts to wear out faster, and shorten the life expectancy of your unit. Your unit will cost you more month after month on your utility bill if the coils are not kept clean. Test performed by the EPA explain that as little as 1/10th of a centimeter of dirt or dust on a coil could reduce efficiency by 21%. Since the average homeowner's heating and cooling bill is $1,500 per year, a 21% loss in efficiency means you could be wasting up to $315 each year.
10% OFF REPAIR LABOR
Our discounted rates save you money with every service call. Our repair trucks are fully stocked so we are able to repair 99% of calls on the first visit.
10% OFF NEW UNIT PURCHASES
If or when it's time for a new energy-efficient unit, you receive 10% off the complete installation. The average unit today is over $5000 installed. The savings typically pays for the initial cost of the service agreement.
Please contact us to discuss our service agreements in more detail. We offer multi-year discounts and will recommend a program that best fits your needs.
D & M Heating & Air the Professional AC Repair Company in Augusta, Evans, Martinez, Grovetown and the entire CSRA.
With regular maintenance you will prevent small problems from becoming big problems and ensure optimal performance of your comfort system. We also offer annual service agreements, which can reduce the cost of a Performance Tune-Up.
WHAT WE DO DURING A PERFORMANCE TUNE-UP:
PERFORMANCE FURNACE TUNE-UP
- Test for carbon monoxide leaks
- Clean burner assembly
- Clean ignition assembly
- Clean blower motor
- Inspect filtration system
- Adjust blower components
- Lubricate moving parts as required
- Test and adjust safety controls
- Tighten electrical connections
- Calibrate thermostat
- Check flue draft
- Check combustion
- Inspect vent piping
- Inspect humidification system
PERFORMANCE AIR CONDITIONER TUNE-UP
- Clean condenser coil
- Inspect evaporator coil if accessible
- Clean condensate drain
- Clean blower motor
- Inspect filtration system
- Adjust blower components
- Lubricate moving parts as required
- Inspect for refrigerant leaks
- Test condensate pump
- Tighten electrical connections
- Test starting capabilities
- Measure air temperature differential
- Monitor refrigerant pressure
- Measure amperage and voltage
PERFORMANCE AIR HANDLER TUNE-UP
- Inspect evaporator coil
- Clean blower motor
- Inspect filtration system
- Adjust blower components
- Lubricate moving parts as required
- Test and adjust safety controls
- Tighten electrical connections
- Calibrate thermostat
- Inspect humidification system
- Inspect electrical heating elements
PERFORMANCE HEAT PUMP TUNE-UP
- Clean condenser coil
- Clean condensate drain
- Check defrost controls
- Inspect auxiliary heaters
- Inspect filtration system
- Lubricate moving parts as required
- Inspect for refrigerant leaks
- Test condensate pump
- Tighten electrical connections
- Test starting capabilities
- Measure air temperature differential
- Monitor refrigerant pressure
- Measure amperage and voltage
